Applies to:

- Revu 20
- Revu 2019
- Revu 2018

Jump to other versions:

### Measure lengths and runs using the Polylength tool

The Polylength tool can be used to measure any length that has multiple points, regardless of its shape. The Perimeter tool functions similarly to the Polyline ** **tool, meaning that you can add and subtract control points, and convert control points and line segments to arcs.

**(**

**Perimeter****Shift+Alt+P**) and the

**(**

**Polylength****Shift+Alt+Q**) tools. These tools function in the same way, but the

**Perimeter**tool measures the total length of the perimeter, whereas the

**Polylength**tool measures the distances between each point as well as the total length.

#### To use the Perimeter tool:

- Go to
**Tools**>**Measure**>**Polylength**(**Shift+Alt+Q**). You may be prompted to calibrate your drawing. - Click all points of the object to be measured.
- The measurement will finish automatically once you click on the original point, or you can
**double-click**or press**Enter**to create the markup without closing the shape.

#### Create curves in your measurement while placing points:

- Click the
button (**Perimeter****Shift+Alt+P**). - Click a point of the object to be measured. To create a curve at the next point, hold
**Ctrl**and then click and drag away from the point. Once you have the desired curve, release the mouse.

#### Create curves in an existing measurement:

- In a completed Perimeter or Polylength measurement, you can convert a measurement line to a curve
**r****ight-click**the line and select**Convert to Arc**.

To convert a control point to a curve,**right-click**the control point and go to**Control Point**>**Convert Control Point to Arc**. **Click and drag**the curve’s control points to match the shape of the object you want to measure.

You can learn more about the Polylength and Perimeter tools in the Revu Help.

How-To

Revu 2019

Measurement

Revu 20

#### Other versions of this article

## Revu 2017 and older

### Measure lengths and runs using the Perimeter tool

We have received a number of requests from our users for Revu to include a Length measurement tool that measures multiple points, instead of just two. What most may not know is that this can already be done with the **Perimeter measurement tool**. When using the Perimeter tool, it does not need to be placed in a closed loop. It can be open, allowing you to measure runs of cable, pipe, roads or any other length that has multiple points. You can also create a curved length measurement between two points.

The Perimeter tool is based on the **Polyline **tool. This means that you can add and subtract control points and convert control points or line segments to arcs – just like you can with a Polyline. Here is what you can do with the Perimeter tool, which is found in the

**Measurements** tab,

*Alt+U*:

### Create a polyline length

- Click the
**Perimeter** button, or press*Shift+Alt+P*. - Click and release to define all corners on the PDF.
- Press
*Enter*to end the Perimeter without closing the shape.

### Create a rectangle by defining two points

- Click
**Perimeter** button, or press*Shift+Alt+P*. - Click and drag between the two diagonal corners of the rectangle.

### Create a polygon or rectangle by defining each point

- Click the
**Perimeter** button, or press*Shift+Alt+P*. - Click and release to define three corners.
- Click the first point to close the Perimeter.

### Create curves in your measurement while placing points

- Click the
button, or press**Perimeter***Shift+Alt+P*. - Click and release to define first point, then move to next point.
- Hold down
*Ctrl*, then click and hold left mouse button while dragging out. - Release to set curve point.

Below is an image with a sample that shows different types of Perimeter measurements:

How-To

Revu 2017 & Below

Measurement