Snapshot

1. Go to Edit >  Snapshot.
2. Click and drag a rectangle or click the desired points to define a polygonal shape around the desired area. The area defined flashes blue, indicating a Snapshot has been taken.
3. Press ESC to exit Snapshot mode.

4. Use any of the following methods to paste the Snapshot within Revu:

   • Go to Edit > Clipboard >  Paste.
   • Press CTRL+V.
   • Right-click and select Paste.
   • Click Paste on the Edit toolbar.

Tip: When using either the CTRL+V keyboard shortcut or the right-click > Paste method, the snapshot is pasted at the current position of the mouse cursor (specifically, the lower-left corner is placed on the cursor).

Note: Text in a Snapshot cannot be edited using Edit Text until the Snapshot has been flattened.

Color Processing works on a snapshot much like it works on a PDF.

Use one of the following to use open the Color Processing dialog box for a snapshot: 

• Right-click the desired snapshot and select Change Colors.
• Right-click the desired snapshot, select Properties, then click Change Colors on the Properties tab.