Markups List

The Markups list toolbar contains tools for organizing, processing, importing, and exporting data.

Markups List menu:

 Hide Markups: Turns on Hide Markups mode, hiding all markups in the current PDF file. Markups will not be shown or printed when this mode is enabled. Select this again to exit Hide Markups mode. This mode is temporary and will be reset the next time Revu is started.

 Search: Filters the Markups list based on the text entered in the field.

 Filter List: Select to turn on Markups List filters.

When enabled, a new Saved Filters icon appears. Select this icon to show a menu that contains options for clearing current filters or saving the current configuration for later use, including:

• Clear All: Clears all filters currently in use to view an unfiltered Markups list.
• Save Filter: Saves the current filter configuration for later use. Enter a name for the saved filter configuration in the Saved Filter Name field and select Save Filter to save it.
• Any saved filter sets appear between the Clear All and Save Filter options. Select one to apply its filters to the Markups list.
  • A filter set that is currently engaged will have a check mark next to it.
  • A filter set that is currently engaged but has been changed (for example, if you engage a saved filter set then apply a new column filter) will also have an asterisk next to it.
  • Select Delete Saved Filter to the right of a saved filter configuration to delete it from the list. You will be asked to confirm the deletion.

Summary: Publishes a summary report of all the markups in a PDF. A PDF Summary can be saved as a separate PDF or appended to the end of the current PDF. It is also possible to export a Summary as CSV or XML data for use in Excel or other programs.

The Markups list is formatted as a table with each row representing a markup that has been added to the active PDF and each column showing a particular piece of information about the markup.

As a row is selected, the view of the PDF in the workspace will jump to the location of the associated markup. This makes it easy to use the Markups list to step through the markups in PDF using the up and down arrow keys.

To sort by any column, select the desired column header. Select again to reverse the sort order. When sorting by certain columns (for example, Subject, Page Number, and Page Index), a secondary sort by creation date is automatically applied.

When markups are sorted by column, they are collected under section headings found in the Subject column. Each section has a toggle triangle; select it to expand or collapse the section.

The following examples show an expanded, collapsed, and partially collapsed list sorted by Page number:

Expanded List

Collapsed List

Partially Collapsed List

The columns shown in the Markups list is highly customizable. Toggle various columns on and off by selecting them from the Markups List > Columns menu. The list reveals currently available columns: checked columns are currently shown in the Markups list and unchecked columns are hidden. Data is still stored for hidden columns and columns can be hidden or shown at any time. Simply select a column from this menu to hide or show it.

Not all columns are necessarily shown in this list. For details regarding how to hide or show other columns, and how to create custom columns, see Using the Markups List.

The available built-in columns are:

Subject: Shows both an icon and text that indicate the type of markup used on the PDF. This text can be changed in the Subject field in the Properties panel, or by double-clicking on the Subject text in the Markups list.

Page Label: Shows the page of the PDF on which the markup is located.

Page Index: Shows a numeric value indicating on which page the markup or measurement resides. Page Index is a useful column to use for sorting when exporting to spreadsheet programs.

Lock: Shows whether the markup is locked for editing or not. If locked, a appears in the box, and the markup cannot be moved or changed, though some functions, such as changing the Status or entering a Reply, are still permitted. If unlocked, the box is clear and the markup can be edited. Select to toggle a lock on or off.

Status: Shows the current status of the markup. To set a status, select the markup and use the Status menu in the column header or right-click the markup and go to Set Status to select it.

Checkmark: A simple checkbox that enables the Markups list to be used as a basic checklist. Select to toggle a checkmark on or off.

Author: Indicates the person (identified by username) who created the markup. Double-click this field to edit an author's name. To change your username, go to General Preferences and enter the desired name in the User field.

Date: Shows the date and time the markup was last modified, based on the system time.

Creation Date: Shows the date and time the markup was created, based on the system time.

Color: Shows the line color used for the markup.

X and Y: Shows the coordinates on the PDF page where the markup is located, counted from the lower left.

X Center and Y Center: Shows the center coordinate value of the markup on the PDF page.

Document Width and Document Height: Shows the size of the markup on the PDF.

Comments: Shows the comments from the General section of the Properties tab for this markup. Replies are also shown in this column. Double-click in this field to change the text.

Wall Area: Shows the total Wall Area for Area or Perimeter markups.

Length, Area, Volume, Count and Measurement: Each shows values associated with Measurement markups.

Label: Shows the label associated with the markup. The label can be changed in the General section of the Properties tab. For measurement markups, it is common to use the Label field to specify the type of material that's being measured, such as "Tile 1" or "Carpet 3."

Sequence: Records the numerical value associated with a Sequence markup.

Capture: Shows whether a markup has embedded images or videos. If embedded images or videos are present, a appears in this column; double-click this icon to preview the embedded media.

Depth: Shows the depth of the markup on the PDF.

Rise/Drop: Shows the length of the rise or drop defined for the Polylength or Perimeter measurement.

Slope: Shows the slope ratio of an Area or Length.

Layer: Shows the layer that contains the markup.

Legend: Shows the name of the markups legend in which the markup included.

Height and Width: Shows the actual height and width of the element represented by the markup on the PDF.

Space: Shows the Space that contains the markup.

Unit: Shows the unit of measure used for the markup.

3D View: Shows the 3D view that contains the markup. Select to jump to that view in the 3D window.

Right-click on any field in the Markups list to call up a context menu for performing functions on that markup:

Copy stores the contents of the specific cell that was right-clicked onto the clipboard. This information can then be pasted elsewhere in Revu or another Windows application.

Layer is used to assign a markup to a layer on the PDF. If a markup that is associated with a layer is flattened, it is automatically flattened on that layer.

Lock prevents users from altering the markup on the PDF. Certain changes to the Markups list for the markup can still be made, however (changing the Status or entering a Reply, for example).

Legend shows the markups legend in which the markup is included or creates a new markup legend including the selected markups.

Reply: Replies to the selected markup. Replies appear on a new indented row below the markup in question.

Set Status: Sets the status of the markups. The default statuses are Accepted, Rejected, Completed, Cancelled and None. Custom states can be created.

 Check: Checks or unchecks the checkbox associated with the selected markup. Also provides a command to clear all checkboxes.

Delete: Deletes a selected reply from the Markups list or a selected markup from both the PDF and the list.

Properties: Opens the Properties panel for the markup.